Technical Specifications
CLASSIC DESIGN:
|
|
Raw material: ABS resin, POM, SUS, silicon, EPDM
Surface treatment: Resin gloss finish
Size: (W x H x D): 78mm × 225mm × 72mm
Operating temperature: 1 to 60 °C
Operating water pressure: 0.05 to 0.4 Mpa
Shower hole: 0.19 mm (615 holes)
Hose fitting size: Universal Standard 1/2 inch
Made in JAPAN |
02-S DELUXE DESIGN:
|
|
Raw material: ASA resin, POM, SUS, silicone, EPDM
Surface treatment: Chrome, Chrome Plating
Size: (W x H x D): 80mm × 255mm × 80mm
Operating temperature: 1 to 60 °C
Operating water pressure: 0.05 to 0.4 Mpa
Shower hole: 0.19 mm (615 holes)
Hose fitting size: Universal Standard 1/2 inch
Made in JAPAN |
ECO STOP-LEVER DESIGN:
|
|
Raw material:ASA resin, ABS resin, SUS, silicone, EPDM
Surface treatment: Chrome, Chrome Plating, Resin gloss finish (White)
Size: (W x H x D): 80mm × 255mm × 80mm
Operating temperature: 1 to 60 °C
Operating water pressure: 0.07 to 0.4 Mpa
Shower hole: 0.19 mm (615 holes)
Hose fitting size: Universal Standard 1/2 inch
Made in JAPAN |
FREE Filter with every Shower!
We understand some areas may have some impurities in the water or you may live in a 'hard water' area. To help protect your shower plate, we have included a free filter as standard with every shower. If you do live in a ‘hard water’ area please remember to clean the filter regularly and also clean the ‘shower plate’ as required.
EASY CLEAN - 30 SECOND CARE TIP"
Simply follow these simple steps:
1. Remover cover
2. Flip the shower plate 180 degrees.
3. Turn on the shower for 30 seconds.
4. Flip the shower plate back and cleaning process is complete.
eco Shower Tab Compatible:
20%-25% Extra Water Saving | New Amane "eco Stop-Lever”
If you are extra conscious about water saving or have a large family (and everyone wants a hot shower!!!)... simply flick off the water supply with the eco Stop-Lever while you shampoo your hair or soap your skin. For every minute off, eco Stop-Lever saves you 20%-25% water and energy based on a 4-5 minute shower time! amane Mist-Sensation Showers also help reduce shower times, partly because the mist-sensation spray gets you soaking wet quicker and rinses shampoo out quicker.
|
Unique “eco Stop-Lever” allows you to flick off the shower temporarily to help save even more water.
 Variable power lever:
With all amane Mist-Sensation Showers it's possible to half the time of the average 8 minute shower to under 4 minutes - saving you at least 50% water - partly because the mist-sensation spray gets you soaking wet quicker and also rinses shampoo out quicker.
Additionally, if you have the water off for an additional 60 seconds while you shampoo and soap - using the eco Stop-Lever - you could benefit from an additional 25% SAVING!
|
GET WETTER QUICKER:
All amane Mist-Sensation Showers have our unique spray-plate - 615 x 0.19mm spray holes - which get you soaking wet and rinse hair quicker!
The combination of the shower head design and the 0.19mm spray holes (World's Finest) double the power of any shower yet help save water!
How do you get the balance between "water saving" and a great "Shower Experience"?There are several "water saving " showers available on the market however many are too weak or soft. On the other hand some “Rain Showers” (below left) can create a harsh “pins-and-needle” like sensation on your skin however “amane Mist-Sensation Showers” (below right) use much smaller “ultra-fine spray holes” that help increase the power of your shower… without hurting your skin!
As Goldilocks would say: “not too hard, not too soft… just right!” Rain Shower 300 holes (left) v amane Mist Sensation Shower 615 holes (right)
|
World’s first “Mist-Sensation” Shower:
amane in Japanese literally means “Heavenly Rain” and delivers an experience to match! Using 615 x 0.19mm precision holes amane Shower Heads create a “Rain-Mist-Sensation”, generating twice the power yet saving 24%-35% water! An experience to enjoy everyday!
amane in Japanese literally means “Heavenly Rain” and delivers an experience to match! Using 615 x 0.19mm precision holes amane Shower Heads create a “Rain-Mist-Sensation”, generating twice the power yet saving 24%-35% water! An experience to enjoy everyday!
EASY CLEAN SYSTEM:
Hard water? If you have hard water, simply unscrew the the shower plate, flip it 180 degrees, spray for 30 seconds and flip back to original position once a week or when necessary. Option filters are also available...
EASY INSTALL:
Simply twist-off old shower head, wipe hose threads with a damp cloth, twist on new head and you’re good to go! Compatible with al Universal Standard G ½ inch hoses.
